Best MEP Company in Dubai

Best MEP Company in Dubai

MEP Company in Dubai

Magnus Interiors is an MEP company in Dubai that designs, installs, tests and commissions mechanical, electrical and plumbing systems, along with fire protection and IT networks. Since 2006 we have delivered MEP works for villas, apartments, offices, shops, restaurants, warehouses and industrial facilities. We work from your consultant’s approved drawings or design the systems ourselves, and we take each project through to authority inspection and handover.

Since 2006 · Design to commissioning · Residential, commercial and industrial · Based in Jebel Ali, Dubai

Get an MEP quote WhatsApp us

MEP stands for mechanical, electrical and plumbing: the building services that make a space usable, comfortable and safe. Mechanical covers heating, ventilation and air conditioning (HVAC). Electrical covers power, lighting and distribution. Plumbing covers water supply and drainage. In Dubai, MEP work usually also includes fire protection and low-current systems such as data, CCTV and access control.

System

What it includes

What it means in Dubai

Mechanical (HVAC)

Air conditioning, ventilation, fresh air, extraction, process cooling

Cooling runs for most of the year, so system efficiency drives running costs

Electrical

Power distribution, MDB and SMDB panels, cabling, lighting, earthing

Designs and installations need DEWA approval and inspection before power is connected

Plumbing

Water supply, drainage, sanitary fittings, wastewater

New buildings must meet Al Sa’fat water-efficiency rules, including low-flow fixtures

Fire protection

Fire suppression and fire-fighting pipework

Approved and inspected by Dubai Civil Defence

IT and low current

Structured cabling, networks, CCTV, access control, automation

Planned with the other services so cable routes don’t clash

Because these systems share the same ceilings, walls and risers, they have to be coordinated before installation starts. That coordination, more than any single trade, is what an MEP company is hired for: clashes found on site mean rework, failed inspections and late openings.

Magnus delivers six MEP services, from design and installation through to testing, commissioning and maintenance.

Air-conditioning, ventilation and air-handling systems sized for Dubai’s heat and humidity. We cover fresh-air and exhaust systems, kitchen extraction for restaurants, and process cooling and ventilation for industrial sites. Each system is designed for steady temperatures, good indoor air quality and lower energy and servicing costs.

Load calculations, main and sub-main distribution boards (MDB and SMDB), power distribution and cabling, lighting, earthing, and automation and control wiring. The scope runs from a single villa to high-voltage installations on industrial sites. We prepare the drawings and load schedules DEWA requires and take the installation through inspection to power-on.

Water supply, drainage, sanitary fittings and pipework, pressure-tested before handover. For commercial and industrial sites we also handle wastewater systems. Layouts are balanced for steady flow and pressure, and fixtures are chosen to meet Dubai’s water-efficiency rules.

Fire suppression and fire-fighting pipework, coordinated with ceilings, ducts and cable trays from the start. Systems are installed to the UAE Fire and Life Safety Code for Dubai Civil Defence approval and inspection.

Structured data cabling, networks, control and automation systems, and security systems such as CCTV and access control. We plan cable routes alongside power and HVAC so containment is ready before ceilings close.

Planned and reactive maintenance for HVAC, electrical and plumbing systems after handover, as agreed in your contract. Regular servicing keeps air conditioning efficient through the summer and catches faults before they cause downtime.

Magnus delivers MEP for residential, commercial and industrial projects across Dubai.

Sector

Typical MEP scope

Villas and apartments

AC replacement and upgrades, rewiring, DB upgrades, bathroom and kitchen plumbing

Offices

HVAC zoning, lighting and power layouts, data cabling, access control

Retail and mall units

Shop lighting and power, AC tie-ins to the mall system, landlord MEP approvals

Restaurants and cafés

Kitchen extraction, extra electrical load, grease-trap drainage

Warehouses and industrial sites

Process cooling, ventilation, high-voltage power distribution, wastewater systems

MEP as part of your fit-out. If you are fitting out a space, Magnus can deliver the MEP together with the interior fit-out and bespoke joinery under one contract. Services, ceilings and joinery are then coordinated on the drawings before anyone starts on site.

Most MEP work in Dubai needs approval from at least two bodies: DEWA for power and Dubai Civil Defence for fire safety. Which other authority applies depends on where the building is.

Authority

What it approves for MEP

Landlord or building management

NOC before any submission, and connections to shared building services

DEWA (Dubai Electricity and Water Authority)

Electrical design, load, LV inspection and connection

Dubai Civil Defence

Fire and life safety systems, approved and inspected before occupancy

Dubai Municipality

Building permits, including Al Sa’fat green building rules for new buildings

Trakhees, DDA, DMCC, DIFC

Approvals for projects in the areas each one regulates

DEWA connections. For shop and office fit-outs, a DEWA-enrolled contractor or consultant submits the application with the distribution board details, load schedules, lighting and power layouts and the landlord’s NOC. DEWA then inspects the low-voltage installation before installing the meter and switching on power (dubizzle, August 2024).

Al Sa’fat. Dubai’s green building rating system sets Silver as the minimum for all new buildings, covering energy efficiency (including HVAC and lighting) and water efficiency (including low-flow fixtures) (Property Finder, February 2026).

Every Magnus MEP project follows nine steps, so systems are coordinated on paper before they are built.

  1. Site survey and drawing review. We check existing services, site conditions and any consultant drawings.
  2. Load calculations and design. Cooling, electrical and water loads calculated, systems designed or the consultant’s design reviewed.
  3. Coordination and shop drawings. Duct, pipe and cable-tray routes combined into clash-free drawings.
  4. Material submittals. Equipment and materials submitted for consultant or client approval.
  5. Authority and landlord submissions. Drawings and documents prepared for DEWA, Civil Defence and the landlord.
  6. First fix before ceilings and walls close, second fix once finishes are in.
  7. Testing and commissioning. Pressure tests, electrical tests and air balancing, with results recorded.
  8. Inspection and handover. Authority inspections passed; as-built drawings and operation and maintenance manuals handed over.
  9. Planned servicing as agreed in your contract.

MEP timing depends on floor area, how many systems are involved, and how quickly approvals come back. In a fit-out, MEP runs alongside the main programme: first fix starts once partitions are set out, and testing and commissioning come at the end. We give you a written programme after reviewing your drawings and the site.

Magnus has delivered MEP as part of fit-outs for brands across Dubai and Sharjah, including London Dairy Cafe at Palm Jumeirah and Sahara Centre, Cities at The Dubai Mall and Galleria, and Saucette at Galleria. View all projects

  • 20 years in the UAE. Operating since 2006, from a base in Jebel Ali, Dubai.
  • Design to commissioning. We design or review the systems, install them, test them and hand over with as-built drawings.
  • One contract with your fit-out. MEP, fit-out and joinery delivered together, so services are coordinated before work starts.
  • Residential to industrial. From villa AC upgrades to high-voltage power and process cooling.
  • Energy-conscious design. HVAC and lighting designed to cut running costs in Dubai’s climate.
  • Maintenance and support after handover, as agreed in your contract.

Read more about Magnus Interiors

Contact Now!
Get in touch with our team for MEP solutions and expert consultation.
1. What does an MEP contractor do?

An MEP contractor designs or builds from approved drawings, installs, tests and commissions a building's mechanical, electrical and plumbing systems. In Dubai the contractor also prepares the documents DEWA and Dubai Civil Defence need and takes the systems through inspection to handover.

2. What is the difference between MEP and HVAC?

HVAC (heating, ventilation and air conditioning) is one part of MEP: the mechanical part. MEP also covers electrical systems, plumbing and drainage, and in Dubai usually fire protection and low-current systems too.

3. Do you handle residential and commercial MEP?

Yes. We deliver MEP for villas and apartments, offices, retail and mall units, restaurants, warehouses, commercial buildings and industrial sites.

4. Do you provide turnkey MEP?

Yes. Our turnkey scope covers design coordination, material supply, installation, testing, commissioning and handover. You deal with one team throughout.

5. Can you work from consultant-approved drawings?

Yes. We build from approved drawings and consultant specifications, and we review them for clashes and authority requirements before work starts.

6. Do you handle DEWA and Civil Defence approvals?

Yes. We prepare the drawings, load schedules and documents that DEWA and Dubai Civil Defence require, and coordinate the inspections through to power-on and handover.

7. Do you install and maintain air conditioning?

Yes. We provide HVAC design support, installation, testing and maintenance for residential and commercial projects.

8. Do you do load calculations and DB panel installation?

Yes. Our electrical scope includes load calculations, MDB and SMDB panels, cabling, lighting, power systems and earthing.

9. What plumbing services do you provide?

Water supply, drainage, sanitary fittings, pipework and pressure testing, plus wastewater systems for commercial and industrial sites.

10. How long does an MEP project take?

It depends on floor area, the systems involved and approval times. We give you a written programme after reviewing your drawings and site conditions.

11. Is testing and commissioning included?

Yes. Every project includes testing and commissioning, the final authority inspections, and handover with as-built drawings and maintenance manuals.

12. Do you offer maintenance after installation?

Yes. We provide maintenance and support after handover, as set out in your project agreement.

13. How do I get an MEP quote?

Send your drawings or a short description of the work, with the location and floor area, by WhatsApp or call +971 55 288 7962, or email connect@magnus.ae. We arrange a site visit and send a detailed quotation.

Find us right here

Ready to transform your space? Get in touch with us today and let’s discuss your vision.